For drilling and cone penetration testing contractors: Expert supervision without anyone travelling to site.
SoilX links your company's drilling and CPT rigs to a shared cloud: readings stream live to the office, an external geotechnical consultancy can join whenever needed, and your client follows the work with their own access permission. Contractors without in-house geotechnical engineers can therefore offer drilling and testing with expert supervision – without anyone travelling to site. Live CPT is in field trial; FeldPro is available as an app prototype.
Remote supervision instead of an engineer on site
Many drilling and CPT contractors do not employ their own geotechnical engineers. When a decision is needed mid-job, someone has had to drive out, or the rig has stood idle. With SoilX, the engineer sees the readings live in a browser and joins at short notice – from your own office or from an external consultancy you work with.
That lets you offer supervised work which used to require specialists on your payroll. Responsibility for the engineering judgement stays where it belongs, with the engineer who has joined. Your crew gets the answer while the rig is still set up over the test location.
Real-time cone penetration test data: how readings reach the office
Several rigs, one overview
When several boreholes or tests are running on one site, an engineer cannot stand next to every rig. The Customer Cloud dashboard shows the current state of the tests in progress; the engineer can follow them on a mobile device as well and step in exactly where needed.
Linear infrastructure is a typical case – grid expansion routes such as those common in northern Germany, with many tests along a long corridor and often a UXO survey ahead of the geotechnical work. The more locations run in parallel, the more it matters that data are not gathered up in the evening but are already structured in your cloud.
Your client is there in real time
With their own access permission, your client follows the drilling in a browser – from anywhere, without travelling and without touching the rig controls. Progress and readings are visible at any time, and you as the contractor decide which data are shared.
That shortens the back-and-forth: questions are settled while drilling is under way rather than after the report arrives. It also sets your offer apart from the competition.
A checked measurement chain and records without rework
Whether the cone, cable and measurement chain are working properly often only becomes clear from odd readings. ConeCheck is being developed as a documented field check before use, and Cone Management keeps the full history of every CPT cone. Both are in development, and neither replaces any required calibration.
Field records are created at the rig: FeldPro guides the crew through the field book and soil logging with input forms, a purpose-built soil description keyboard and voice input. By the end of the day the records are structured instead of being typed up afterwards. New staff learn on real jobs, and an engineer can join whenever something is unclear.
One interface for different rigs
Few contractors run equipment from a single manufacturer. SoilX is manufacturer-independent by design: machine-specific data sources are connected on the field side, and the cloud receives one consistent data model. Measuring equipment and acquisition software stay on the rig.
A unified connection of all modules through the RemoteBridge is the next integration stage. We will confirm with you which of your rigs can already be connected.
- Live CPT – live view and remote accessField trial
- CPT Link – mobile work platformAvailable
- FeldPro App and Server ModuleApp prototype
- ConeCheck and Cone ManagementIn development
- RemoteBridge – unified connection of all modulesNext stage
Questions from drilling and CPT contractors
Can we offer supervised drilling without employing our own geotechnical engineers?
Yes. An external geotechnical consultancy follows the readings live in a browser via SoilX and joins at short notice when needed, without travelling to site. The engineering judgement remains with the engineer who joins.
What does our client see?
With their own access permission, the client sees the progress and readings of the drilling in a browser. You as the contractor decide which data are shared, and the client cannot interfere with rig operation.
Does SoilX work with our existing drilling and CPT rigs?
SoilX is designed to connect rigs from different manufacturers, and the acquisition software stays on the rig. The unified RemoteBridge connection of all modules is the next integration stage. We will confirm with you which rigs are already supported.
Can we follow several boreholes or tests at the same time?
Yes. The Customer Cloud dashboard shows the current state of the tests in progress, and an engineer can also follow them on a mobile device. The Customer Cloud is available as a prototype; Live CPT is in field trial.
How does SoilX help when training new staff?
FeldPro guides the crew through the field book and soil logging with input forms, a soil description keyboard and voice input, and an engineer can join when something is unclear. New staff learn on real jobs while the engineering judgement stays with the specialists. FeldPro is available as an app prototype.
How do we get started with SoilX?
The usual starting point is a pilot in which benefits and effort are assessed together. Individual modules can be used without the full system; pricing depends on the modules, the number of rigs and the volume of data.
Discuss your project.
Tell us briefly which measurement data you collect and what currently holds up the evaluation. You will receive a professional assessment in return — not a sales quote.