Magnetometer cone penetration testing for UXO: See anomalies at the depth where they actually lie.
MagnetoMonitor evaluates magnetometer CPT data live along the test depth: two three-axis sensor sets supply six raw channels, gradient and signal changes are displayed in sync with depth, and anomalous sections are marked at the depth where they actually occur. With the Magneto ControlCenter, one UXO specialist monitors up to four rigs at once. The module is a development and assistance system – an anomaly is not an automatic UXO finding and does not replace an expert clearance decision. MagnetoMonitor and the ControlCenter are in development.
Why sites are checked for UXO before drilling
Across large parts of Germany, and northern Germany in particular, bombs, shells and other unexploded ordnance (UXO) from the Second World War are still in the ground. Where there is a suspicion, the ground at each test location is checked for UXO before drilling, piling or foundation work begins. Only then can the geotechnical investigation proper go ahead.
Surface surveys only cover the upper soil layers. For greater depths, the magnetometer itself is taken down into the ground – in a borehole drilled beforehand, or pushed by a CPT rig as a magnetometer CPT. Both methods share one aim: to detect disturbances of the Earth's magnetic field caused by ferrous objects and to assign them to a depth.
What MagnetoMonitor measures and shows
MagnetoMonitor runs at the CPT rig and is currently designed for magnetometer CPT (Magneto CPT); we are looking into a version for borehole surveys. It works with two three-axis sensor sets. Each set measures the magnetic field in three directions, giving six raw channels in total. From the difference between the two sets the module calculates the gradient, which largely suppresses the uniform background field of the Earth and brings out local disturbances – exactly what matters when searching for ferrous objects.
Gradient and signal changes are displayed in sync with depth. Where the signal changes conspicuously, MagnetoMonitor marks the section at the depth where it actually occurs. The raw channels are kept, so every evaluation can always be traced back to the original readings.
An interface to SENSYS magnetometers is in development, as is a PDF report generated on site – so the UXO specialist has the record of a test in hand straight away.
Depth assignment: the critical step
A magnetic signal is only as useful as the depth it is assigned to. If the depth is wrong, the anomaly is in the wrong place – and so is the decision whether work can continue at that location. SoilX therefore combines depth, readings, session and status at the rig before the data are transferred. For Magneto, this synchronisation is the key step.
The completed session is archived unchanged. Evaluations, markings and comments are stored separately, so it remains clear later which raw data led to which assessment.
Magneto ControlCenter: four rigs, one UXO specialist
On grid expansion routes or large development sites, several magnetometer tests often run at the same time, and one UXO specialist cannot stand at every rig. The Magneto ControlCenter shows up to four magnetometer tests side by side in real time, for example in a site container. When MagnetoMonitor detects an anomaly, the display for that rig turns red and a warning tone sounds.
The specialist then decides: send that rig a stop signal or let it continue. How a rig acts on the stop signal is agreed and tested with the manufacturer for each rig. The ControlCenter deliberately runs outside the Customer Cloud: the UXO specialist often comes from an external company, and where there is no mobile coverage a dedicated site network can be set up. Access details for the ControlCenter are entered in the Magneto module.
In the Customer Cloud project view, magnetometer tests sit alongside the cone penetration tests of the same project, together with rigs, operators and documents. Whoever plans the geotechnical investigation later finds the UXO survey data in the same place as the rest of the project.
Limits, reference base and status
MagnetoMonitor is a development and assistance system. A magnetic anomaly is first of all a signal anomaly, not automatically an item of UXO. Assessment and clearance remain with the UXO specialist or qualified person responsible for the survey; the module does not replace an expert clearance decision.
Behind the evaluation sits the Knowledge reference base. It separates cases by origin – simulated, research, test field, field-verified – and records each with probe type, calibration status and algorithm version, so it is always clear what an evaluation is based on.
- Magneto (MagnetoMonitor)In development
- Magneto ControlCenter – up to four rigs, stop signal per rigIn development
- SENSYS interface and on-site PDF reportIn development
- Knowledge – reference and verification baseIn development
- Customer Cloud – dashboard, projects, filesPrototype
- RemoteBridge – unified connection of all modulesNext stage
Questions about magnetometer UXO surveys
What is MagnetoMonitor?
MagnetoMonitor evaluates the data of a magnetometer CPT live along the test depth. Two three-axis sensor sets supply six raw channels, from which gradient and signal changes are displayed in sync with depth. The module is in development.
Does MagnetoMonitor detect UXO automatically?
No. MagnetoMonitor is a development and assistance system. An anomaly is first of all a signal anomaly, not automatically an item of UXO, and it does not replace an expert clearance decision. Assessment and clearance remain with the qualified person.
Why is depth assignment so important in magnetometer surveys?
A magnetic signal can only be assessed if its depth is right. SoilX therefore combines depth, readings, session and status at the rig before the data are transferred, and marks anomalous sections at the depth where they actually occur.
Can one UXO specialist monitor several tests at the same time?
Yes, that is what the Magneto ControlCenter is for. It shows up to four magnetometer tests in real time, turns the display red and sounds a warning when there is an anomaly, and lets the specialist send each rig a stop signal or let it continue. The ControlCenter is in development.
What is the Knowledge reference base?
Knowledge is the reference and verification base behind the Magneto evaluation. Cases are separated by origin – simulated, research, test field, field-verified – and recorded with probe type, calibration status and algorithm version. Knowledge is in development.
Does MagnetoMonitor also work for borehole magnetometer surveys?
MagnetoMonitor is currently designed for magnetometer CPT with a CPT rig. We are looking into a version for borehole surveys, as the evaluation is similar.
Discuss your project.
Tell us briefly which measurement data you collect and what currently holds up the evaluation. You will receive a professional assessment in return — not a sales quote.