Skip to content
SoilX

Real-time cone penetration testing: The readings in the office while the cone is still in the ground.

With SoilX Live CPT you follow a cone penetration test in your browser while it is running, metre by metre: depth, cone resistance qc, sleeve friction fs, friction ratio Rf, inclination and temperature, plus a live profile of soil behaviour types after Robertson. The readings travel from the rig to your own customer server, whatever the make of rig, so the office no longer waits for a file once the test is finished. Live CPT is currently in field trial.

What a live cone penetration test shows

In a cone penetration test (CPT) to EN ISO 22476-1, a cone-tipped probe is pushed into the ground at a constant rate. Load cells record the cone resistance qc at the tip and the sleeve friction fs on the friction sleeve behind it, continuously and in step with depth. Their ratio, the friction ratio Rf = fs / qc expressed as a percentage, is a first indication of whether the cone is passing through coarse-grained or fine-grained soil.

Live CPT streams these values during the test and shows them alongside depth, inclination and the temperature of the cone. Inclination tells you whether the rods are drifting off vertical; temperature matters because changes in temperature can shift the zero reading of the load cells. Anyone watching from the office therefore sees not only the curve but also whether it is being recorded under sound conditions.

A piezocone (CPTu) additionally measures pore water pressure, usually as u2 directly behind the cone. Live CPT is designed to display u2 for piezocones as well. Because some values are calculated and this cannot be tested in the laboratory, the display will be verified on the next piezocone test in the field.

From the rig to the browser

The acquisition software stays on the rig. The field software reads each new data point, shows it to the operator straight away and combines depth, readings, session and status. The RemoteBridge transfers these data to your customer server, where the Customer Cloud opens in a browser and shows exactly the test the crew is running – no export, no email attachments.

Once the test is complete, the session is archived unchanged. Evaluations, comments and approvals are stored separately and remain distinguishable from the raw data, so every figure in a later report can be traced back to the original measurement.

The measuring equipment remains the domain of your rig manufacturer. SoilX sits on top of it: live access, storage and evaluation in one consistent data model, regardless of which rig is pushing the cone.

Live profile and soil behaviour type

Beside the raw curves, Live CPT displays a live profile classified by soil behaviour type (SBT) after Robertson. The method assigns each data point a type – sand-like, silt-like or clay-like, for instance – based on cone resistance and friction ratio. It describes how the soil behaves mechanically during penetration, not its grain size distribution.

That makes the live profile a tool for judging the ground while the test is still under way: where does a soft layer begin, where does the ground become competent, does the picture match nearby boreholes? The classification does not replace logging of borehole samples or professional judgement. In SoilX, automated evaluations are always a working basis to be checked by a qualified engineer.

Who watches from the office – and why it matters

When a test calls for an engineering decision, someone has traditionally had to be on site, or the rig has had to wait. With the live view, the engineer joins from the office instead. Whether to take a test deeper or add another test location can be decided while the rig is still on site.

The same applies when several rigs are working at once: the Customer Cloud dashboard shows the current state of the tests in progress. Contractors without in-house geotechnical engineers can bring in an external consultancy this way, and the client follows the work with their own access permission – the contractor decides which data the client sees.

SoilX for drilling and CPT contractors

SoilX for geotechnical consultants

Status of the modules involved

The live view is part of a system whose components are at different stages. We state each one openly:

  • Live CPT – live view of the cone penetration testField trial
  • Customer Cloud – dashboard, projects, filesPrototype
  • RemoteBridge – unified connection of all modulesNext stage
  • ConeCheck – field check of cone and measurement chainIn development

Which rigs are already connected, and what a pilot would cover for you, we discuss with you directly. Safety-related functions such as stopping the rig are a separate manufacturer integration and are not part of the live view.

Checking the CPT cone: ConeCheck and Cone Management

Cone penetration testing terms explained

Questions about real-time cone penetration testing

Which readings does the live view of a cone penetration test show?

Live CPT shows depth, cone resistance qc, sleeve friction fs, friction ratio Rf, inclination and temperature, together with a live profile of soil behaviour types after Robertson (SBT). For piezocones, pore pressure u2 is also provided for; the display will be verified on the next piezocone test in the field.

Do I need new CPT equipment for real-time monitoring?

No. SoilX is designed to work on top of existing rigs from different manufacturers. The acquisition software stays on the rig, and machine-specific data sources are connected on the field side. We will confirm with you which rigs are already supported.

Where are the data from a live test stored?

The RemoteBridge transfers the readings to your own customer server, so the data stay in your environment. The completed session is archived unchanged, and evaluations remain distinguishable from the raw measurement.

Does the Robertson soil behaviour type replace soil logging?

No. The soil behaviour type describes how the soil responds to penetration, not its grain sizes. It is a working basis for assessing the ground and must be checked by a qualified engineer; logging and interpretation remain with the specialists.

Can the client follow the cone penetration test live?

Yes. With their own access permission, the client sees progress and readings in the browser without interfering with rig operation. The contractor decides which data the client can see.

Is Live CPT ready to use?

Live CPT is currently in field trial. The unified connection of all modules through the RemoteBridge is the next integration stage. To get started, we offer a pilot in which benefits and effort are assessed together.

Discuss your project.

Tell us briefly which measurement data you collect and what currently holds up the evaluation. You will receive a professional assessment in return — not a sales quote.

Contact persons

Stephan Heuer
Denis Schimanski